Powercom Imperial Digital 625VA Line Interactive UPS
Description
Powercom Line Interactive UPS - Imperial Digital series (625VA)
The Powercom Imperial Digital UPS with AVR (Automatic Voltage Regulation) will provide protection against surges, spikes and lightning strikes and battery backup in case of power failure. The unit features a digital LED indicator which displays the output voltage and battery level.
Product Features:
- Elegant design with digital LED indicator displaying battery capacity and output voltage
- Built-in automatic boost and buck AVR (Auto voltage AVR)
- Simulated sine wave output waveforms
- Green mode setting for energy saving
- Automatic self-diagnostic and alarm warnings
- Surge, short circuit, and overload protections
- Discharge and overcharge protection
- Scheduling shutdown & reboot function
- Events recorder of power incidents
Specification
UPS Specs | |
Input Voltage | 100V / 110V / 120V ±25% 220V / 230V / 240V ±25% |
---|---|
Input Frequency | 50Hz / 60Hz ±10% auto sensing |
Output Connections | 5 x IEC Sockets |
Output Voltage (Backup mode) | 100V / 110V /115V / 120V (±5% on battery) 220V /230V / 240V (±5% on battery) |
Output Frequency (Backup mode) | 50Hz / 60Hz ±1% |
Output Waveform | Simulated sine wave |
Output Transfer Time | 2 to 4 millisecond including detection time (typical) |
Automatic Voltage Regulator (AVR) | AVR with 1 step boost and 1 step buck |
Overload Protection | Auto power off if overload exceeds 110% of nominal at 60 seconds; 130% at 3 seconds |
Unit Input Protection | Fuse or overload & short circuit protection |
Tele-communication Protection | N/A |
Alarm | Buzzer beeps under backup mode, battery low, battery charging fault, and overload |
Battery Type | Sealed, maintenance-free lead acid battery |
Typical Recharge Time | 6 hours to 90% |
Battery Quantity | 12V 7Ah x1 |
Battery Protection | Automatic diagnostics, over-discharge and short circuit protection |
Display | LED - Indicates output voltage and battery levels |
Communication Interface | N/A |
Audible Noise | < 40dBA (1m from surface) |
Ambient Operation | Max elevation at 2000m, 0 to 40C, 0 to 95% humidity (non-condensing) |